Delta ST 500
General features of the product
ELECTROSTATIC SYSTEM FOR DELTA SPRAYER UPON REQUEST
The electrostatic device is one of the most important innovations of the past few years to optimise spraying in the field, as it allows reducing drift and loss of product by up to 50%.
This technology can be used on our entire range of sprayers and mist blowers, both trailed and mounted.
Principles
Due to the electrostatic fields that form between the plants, which are good conductors, and the chemical cloud with electrostatic charge created by our machine’s distributors, the droplets, loaded with the active ingredients, are drawn to the plants, thus reducing drift even with wind.
Main advantages
- Reduced loss due to drift
- Even distribution over the leaf surface
- Increased work speed, as the product is drawn to the plants, even the higher parts.
TECHNICAL FEATURES
- Polyethylene tank
- Hand-washing tank
- Circuit-rinse tank
- Pump 100-125 L in brass
- Suction filter
- Large mixer
- Output filter
- Dual pressure valve
- Accessories control valves
- Flip lid
- Galvanised steel frame
- 4-way electric valves with control box
- LED tail lights
- Dual turbine unit diam. 500
- Fan unit in galvanised steel with powder-coated finish
- Centrifuge with expanding clutch
- 2-speed reducer
- 2 adjustable multispout diffusers + 4 spout diffusers
- Built-in bumper
- Low-volume nozzles
- Distribution control valve with hand
- Electrostatic system
- Falchieri patent
ELECTROSTATIC SYSTEM FOR DELTA SPRAYER UPON REQUEST
The electrostatic device is one of the most important innovations of the past few years to optimise spraying in the field, as it allows reducing drift and loss of product by up to 50%.
This technology can be used on our entire range of sprayers and mist blowers, both trailed and mounted.
Principles
Due to the electrostatic fields that form between the plants, which are good conductors, and the chemical cloud with electrostatic charge created by our machine’s distributors, the droplets, loaded with the active ingredients, are drawn to the plants, thus reducing drift even with wind.
Main advantages
- Reduced loss due to drift
- Even distribution over the leaf surface
- Increased work speed, as the product is drawn to the plants, even the higher parts.
TECHNICAL FEATURES
| Supply voltage | From 10 V to 15 V |
| Maximum absorbed current | 1A |
| Output voltage | From 20 KV to 22 KV direct voltage |
| TYPE | MOD.400 | MOD.500 | MOD.600 |
| Capacity (l) | 440 | 550 | 660 |
| Weight Kg | 360 | 380 | 380 |
| Length | 1700 | 1700 | 1700 |
| Machine height | 1080 | 1160 | 1200 |
| Tower height | 2600 | 2600 | 2600 |
| Width | 1260 | 1260 | 1260 |